Changing the door hinging
48
Remove the locking pins from the top
of the hinges.
Remove screws and plug the
empty holes with the stoppers
supplied.
Danger of injury.
Do not close the hinges.
Refit the hinges on the diagonally
opposite side of the door.
Use a power screwdriver to secure
the hinges. The screws are self-
tapping.
Hang appliance door onto pre-fitted
screws, and tighten screws securely.
Replace covers , and .
If required refit the locking pins into
the top of the hinges to prevent the
doors opening too far.
To Next Page
