Installing the appliance
53
Securing the appliance in the
niche
A fitting kit for securing the appliance
at the sides when building it under a
granite worktop is available from
Miele.
Use chipboard screws (4 x 19mm) to
secure the appliance to the worktop
through the mounting plate.
Fitting the furniture door
Ensure that the plinth facing is
refitted correctly.
A gap of 8 mm must be set between
the appliance door and the fixing
bracket.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see on
the diagram).
Undo nuts and take fixing
bracket off together with fitting
aids.
To Next Page
Loading...
Need help?
General
