Wok burner
^ Remove burner caps op, burner
ring q and burner head r.
^ Remove the controls.
^ Loosen screws w, and remove the
burner base.
^ Whilst counterholding it in place with
an SW 13 spanner, unscrew the main
jet anti-clockwise from its housing
using an SW 10 spanner (see
illustration).
^ Screw in the new main jet, once
again using the spanner to
counterhold.
^
Secure the jet against inadvertent
loosening with sealing wax.
Conversion to another type of gas
57
To Next Page
Loading...
