Stop and Go
Your cooktop has a Stop and Go feature which, when
activated, reduces the power of all switched-on cooking
zones to level 1. The power levels of the cooking zones and
the timer settings cannot be changed, the cooktop can only
be switched off.
When Stop and Go is deactivated, the cooking zones resume
at the power setting which was last set.
If Stop and Go is not deactivated, the cooktop switches off
after 1 hour.
When Stop and Go is activated
- the countdown of a time programmed for auto switch-off
will be interrupted. When deactivated, the time will continue
to run.
- the minute minder will continue to run without interruption.
Activating
^ Touch the sensor.
The power of the cooking zones in use will be reduced to
level 1.
Deactivating
^ Touch the sensor.
The cooking zones will now run at the power levels previously
set.
Safety features
41
To Next Page
Loading...
