To deregister the cooktop
From Miele{home, first prepare the deregistration
procedure on the display device (see Miele|home
installation instructions)
^
With the cooktop switched off, touch the s and $ sensors
at the same time until the Lock indicator flashes.
After starting the programming function, P (Program) and S
(Status) will appear in the timer display. With cooktops that
have 3 cooking zones, an additional display appears at the
back left.
^
Touch the sensor for the front left cooking zone followed
by 1 on the settings bar. (Program 10 selected).
^ Touch the sensor for the front right cooking zone followed
by 1 on the settings bar. (Status 1 selected =
Deregistration).
The deregistration process begins and 1 flashes.
Deregistration will take a few minutes. 1 will become steady
when the process has been completed successfully.
^ To save the setting, touch the s sensor until the displays
go out.
^ Follow the installation instructions of Miele|home or
Con|ctivity.
Con|ctivity and Miele|home
59
To Next Page
Loading...
