Program* Status** Setting
P00Demo mode and factory
default settings
S 0 Demo mode ON
(after switching the cooking zone
on dE appears in the timer display
for several seconds)
S1 Demo mode Off
S 9 Factory default settings restored
P02Number of power levels S0 9 power levels
(1, 2, 3 ... to 9)
S 1 17 power levels
(1, 1., 2, 2., 3 ... to 9)
If Auto heat-up is selected:
A will flash alternately with the
continued-cooking setting.
P03Induction warning tone
when there is no or
unsuitable cookware.
S0 Off
S 1 Quiet
S 2 Medium
S 3 Loud
P04Keypad tone when a
sensor is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P05Timer tone S 0 Off
S 1 Quiet, 10 seconds
S2 Medium, 10 seconds
S 3 Loud, 10 seconds
* Programs not listed here are not available.
** The factory default settings are shown in bold.
Programming
48
To Next Page
Loading...
