Operation
40
Booster function
The cooking zones are equipped with a
TwinBooster.
When the Booster function is activated,
the power is boosted so that large
quantities can be heated up quickly,
e.g. when boiling water for cooking
pasta. The boost in power is active for a
maximum of 15minutes.
When the Booster function is
activated, the settings for active
cooking zones may be changed, see
“Induction – Power management”.
The Booster function can be used on a
maximum of 2 cooking zones or 1
PowerFlex cooking area at the same
time.
If the Booster function is switched on
when
- no power level has been selected,
the cooking zone will revert
automatically to level9 at the end of
the Booster time or if the Booster
function is switched off before this.
- a power level has been selected, the
cooking zone will revert automatically
to the power level selected at the end
of the Booster time or if the Booster
function is switched off before this.
Activating the TwinBooster
Level 1
Place the cookware on the cooking
zone you want to use.
Select a power level if necessary.
Touch the Bsensor control.
The indicator light for TwinBooster
level 1lights up.
Level 2
Place the cookware on the cooking
zone you want to use.
Select a power level if necessary.
Touch the Bsensor control twice.
The indicator light for TwinBooster
level 2lights up.
Deactivating TwinBooster
Touch theB sensor control
repeatedly until the indicator lights go
out.
or
Set another power level.