Timer
45
Switching off a cooking zone
automatically
You can set a time after which a
cooking zone will switch off
automatically. This function can be
used for all cooking zones at the same
time.
The switch-off time is set on the
numerical display for each cooking
zone you want to switch off
automatically.
If the time programmed is longer than
the maximum operational time
allowed, the safety switch-off will
switch off the cooking zone after the
maximum permitted safety time has
elapsed (see “Safety features – Safety
switch-off”).
Select a power level for the cooking
zone you require.
Touch the sensor control.
The indicator light will begin to flash.
Set the required duration.
If you want to set another cooking
zone to switch off automatically,
follow the same steps as described
above.
If more than one switch off time is
programmed, the shortest time left will
be displayed, and the corresponding
indicator light will flash. All the other
indicator lights will light up constantly.
If you want to show the time left for
another zone which is counting down
in the background, touch the
sensor control repeatedly until the
indicator light for the zone you require
flashes.
Changing the switch-off time
Touch the sensor control
repeatedly until the indicator light for
the cooking zone you require flashes.
Set the required duration.
Deleting the switch-off time
Touch the sensor control
repeatedly until the indicator light for
the cooking zone you require flashes.
Touch the 0 sensor control on the
numerical display.
To Next Page
Loading...
