Miele KMDA 7676 - Power level

Operation
40
Power level
Setting the power level
Permanent pan recognition is activated
as standard (see “Adjusting settings”).
When the hob is switched on and you
place an item of cookware on a cooking
zone, the cooking zone indicator starts
to flash.
 Place the cookware on the cooking
zone you want to use.
 Touch the appropriate sensor control
for the power level you want on the
numerical display.
Setting the power level – extended
setting range
 Press the numerical display between
the sensor controls.
A dot appears after the power level in
the cooking zone selection.
The sensor controls to the left of the in-
terim level light up brighter than the
other sensor controls.
Example:
If you have set power level 7., the cook-
ing zone selection will show 7..
The number 7 on the numerical display
will light up brighter than the other
sensor controls.
Changing the power level
 Touch the relevant cooking zone in-
dicator.
The cooking zone indicator appears
brighter.
 Touch the appropriate sensor control
for the power level you want on the
numerical display.
Manually connecting/discon-
necting PowerFlex XL cooking
zones
 To manually connect or disconnect
the PowerFlex XL cooking zones,
touch the sensor control.