Miele PG 8056 - Changing DOS Module Names

Additional settings
83
Changing a DOS
name
 Select Change name and confirm your entry with theOK button.
Change name
DOS1
<
_ _ _ _ _ _ _ _ _ _ _
P
OK
#
a
ä b c
.
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line.
DOS is a set part of the name and cannot be changed.
The top line shows which option has been selected.
 Use the arrow buttons (move left) and  (move right) to move the
cursor to the desired option.
 Confirm each option individually with the OKbutton.
The following options are available:
– Letters from A - Z;
each new word will start with a capital letter.
– Numbers from 0 - 9
– Space characters
– Use the  symbol to delete the last position in the name displayed.
– Select OK to save the name.
– If you do not want to save the name you have entered, press the 
symbol.