Programme chart
154
Programme Use
Pre-wash
1 2 3
(Free memory)
Programmable programme for special applications;
programming by arrangement with the Miele Customer
Service Department.
(Free memory)
Programmable programme for special applications;
programming by arrangement with the Miele Customer
Service Department.
Vario TD Inst 4trays
Cleaning and disinfection programme, compliant with
ENISO15883, for reprocessing instruments in A 202
mobile unit for 4 DIN mesh trays.
CW
1Min
Vario TD Inst 6trays
Cleaning and disinfection programme, compliant with
ENISO15883, for reprocessing instruments in mobile
unit/basket combinations for 6 A 202 and A 103 mesh
trays.
CW
1Min
Vario TD MIS
Special cleaning and disinfecting programme, compliant
with ENISO15883, for processing instruments from
minimal invasive surgery (MIS).
CW
1Min
Vario TD Inst 8trays
Cleaning and disinfection programme, compliant with
ENISO15883, for reprocessing instruments in 8 A 208
mesh trays.
CW
1Min
Vario TD AN
Special cleaning and disinfecting programme with
higher water levels for processing
anaesthetic utensils. This programme is compliant with
EN ISO 15883 80°C (+5°C, -0°C) with a 10-minute
holding time for medical devices that come into direct
contact with the skin.
CW
1Min
Vario TD GYN
Special cleaning and disinfecting programme, compliant
with ENISO15883, for reprocessing gynaecological
instruments (GYN).
CW
1Min