Further settings
91
Test programme
Various programmes are available for monitoring cleaning
performance in routine testing.
See “Maintenance” for more information on these programmes.
Filter maintenance
HEPA filter
replacement
The air filter in the drying system must be replaced regularly with a
new one. For more information on changing the filter, see
“Maintenance / Changing the HEPA filter”.
Cleaning the
filters in the
wash cabinet
The filters in the wash cabinet must be checked daily and cleaned
regularly, see “Maintenance/Cleaning the filters in the wash cabinet”.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Cleaning the
A 800 tubular filter
The A 800 tubular filter can be used in special injector manifolds on
various mobile units and baskets and must be cleaned regularly.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Activating and
setting the
interval
Open the menu as follows:
button
Further settings
Filter maintenance
Filter combination or Tubular filter
Inactive
Active
Inactive
Active
Filter combination Tubular filter
- Active
The cleaning interval is activated.
The Active selection allows you to reset the counter or set the
cleaning interval.
- Inactive
The cleaning interval is deactivated.
Select an option using the and arrow buttons and confirm your
choice with OK.
To Next Page
Loading...
