Miele PW 6321 - Connecting the Dispenser Pumps; Steam Connection

Installation
67
Please refer to the wiring diagram and installation plan provided.
These plans are important for the electrical connection.
Connecting the dispenser pumps
Connection terminals for 4time-controlled dispenser pumps, which
can be operated without a multifunction module, are located behind
the cover adjacent to the electrical connection. See enclosed wiring
diagram.
Steam connection
The steam connection may only be carried out by an authorized in-
stallation technician. See the installation plan and installation instruc-
tions provided.
The steam valve and the condensate separator are available from
Miele dealers or MieleCustomerService.
Once the machine has been successfully installed and connected,
reassemble all the casing parts that were removed.
 Risk of electric shock and injury from live or rotating machine
parts.
If the washing machine’s casing is not fully assembled, it is possi-
ble to come into contact with live or rotating machine parts.
Once the washing machine has been installed, completely re-
assemble all the casing parts that were removed.