Operating the tumble dryer
20
Time display
The remaining programme duration will
be displayed in hours and minutes.
The duration of most programmes can
vary which can lead to time jumps. The
duration depends on the quantity of the
laundry, the type of laundry and the
residual moisture of the laundry. The
electronics continually access
conditions in the appliance and adjust
the programme duration with increasing
accuracy.
Sensor controls
–
After touching the sensor, a later
start time for the programme (delay
start) can be selected. When
selected, lights up brightly.
–
The or sensors are used for
selecting the duration of the delay
start period or the duration of the
Warm air programme.
Start/Stop sensor
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already been
started. The sensor flashes slowly as
soon as it is possible for a programme
to be started and then lights up
constantly after the programme has
started.
To Next Page
Loading...
Need help?
General
