Miele TCE 620 WP User Manual

Delay start
30
To select delay start
 Touch the  sensor.
 lights up brightly
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
– Selection is from  (minutes) to 
(hours) in half-hour stages and then
in one hour increments up to .
– By touching the  or  sensors
repeatedly, the time goes upwards or
downwards.
– If you touch the  sensor again, the
selected time is deleted.
To begin delay start
 Touch the Start/Stop sensor.
– Start/Stop and  light up
– The   sensors go out
– Delay start times of more than  will
count down in hours and then in
minutes until the start of the
programme.
– The drum will turn briefly every hour
until the start of the programme to
reduce creasing.
Changing delay start
 Touch the Start/Stop sensor.
 You can change the time with the 
 sensors.
 Touch the Start/Stop sensor so that
the delay start period continues.
Adding or removing laundry
 You can open the door to add/
remove laundry.
– All programme settings will be saved.
– You can also change the drying level,
if required.
 Close the door.
 Touch the Start/Stop sensor so that
the delay start period continues.
Cancelling delay start
 To cancel, turn the programme
selector to .

Miele TCE 620 WP Specifications

General

Brand	Miele
Model	TCE 620 WP
Category	Dryer
Language	English