Operating the tumble dryer
19
How the control panel works
The , , and sensors respond
to fingertip contact. Selection is
possible as long as the respective
sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible
Sensor controls for the drying
levels
After selecting a drying level
programme with the programme
selector, the proposed drying level
lights up.
Drying levels that can be selected are
dimly lit.
Indicator lights
–
lights up when the condensed water
container needs to be emptied.
–
lights up when the plinth filter has to
be cleaned.
– PerfectDry
The Perfect Dry system measures the
residual dampness of the laundry in
the drying level programmes and
therefore ensures precise drying.
This indicator . . .
. . . will flash after the programme has
started until the programme duration
is determined and will then go out.
. . . will light up again when the drying
level is reached towards the end of
the programme.
. . . stays dark with the following
programmes: Woollens handcare,
Warm air.
Gentle tumble sensor
For drying temperature-sensitive fabrics
with the symbol. When it is touched,
Gentle tumble lights up brightly.
With some programmes, Gentle tumble
is always active (lights up) or inactive
(does not light up).
To Next Page
Loading...
