Before using for the first time
21
Remove the protective foil and
stickers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
After installing the dryer
Before using the tumble dryer for
the first time, ensure that it is
installed and connected to the
electricity supply correctly. If it has
not been transported as described in
"Installation and connection" then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
Follow the procedure for using
for the first time outlined in
these instructions.
Read "1. Notes on correct laundry
care" and "2. Load the tumble dryer".
You can then load the dryer and
select a programme as described in
"3. Select a programme and start it".
To Next Page
Loading...
Need help?
General
