Before using for the first time
19
Removing the protective foil
and stick
ers
Please
remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not r
emove any labels
(e.g. the data plate) which are visible
when you open the door.
After installing the tumble
dr
yer
Befor
e using the tumble dryer for
the first time, ensure that it is
installed and connected to the
electricity supply correctly. If it has
not been transported as described in
"Installation and connection", then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
Follow the procedure for using
for the first time outlined in
these instructions.
Rea
d "1. Notes on correct laundry
care" and "2. Loading the tumble
dryer".
Y
ou can then load the tumble dryer
and select a programme as
described in "3. Selecting and
starting a programme".
To Next Page
Loading...
Need help?
General
