Changing the programme sequence
32
You cannot change to another
pr
ogramme once a programme has
started (this prevents unintentional
alterations).
If you try to change a programme,
lights up until the original programme is
reset.
You will need to cancel the current
pr
ogramme before you can select a
new one.
Cancelling a programme while
it is running and selecting a
new pr
ogramme
P
ress the Start/Stop button.
The items will be cooled down,
depending on the t
emperature reached
and how long they have been dried for.
will light up if you press the
Start/
Stop b
utton again during this cooling
down phase.
P
ress the button to switch the
dryer off.
P
ress the button to switch the
dryer on.
Selec
t and start a new programme
straight away.
Adding or removing laundry
aft
er a programme has started
P
ress the
Start/Stop b
utton.
The items will be cooled down,
depending on the t
emperature reached
and how long they have been dried for.
will light up if you press the
Start/
Stop b
utton again during this cooling
down phase.
Danger of burning!
Do not touch the back of the drum
when adding o
r removing items. The
drum and the items can be very hot.
Add
or remove items.
Clo
se the door.
To continue with the programme:
(select a drying level first of all, if
necessa
ry)
P
ress the
Start/Stop b
utton.
Programme duration
Altering the programme sequence can
cause the
programme duration shown
in the time display to be adjusted.
To Next Page
Loading...
Need help?
General
