Cleaning and care
37
Cleaning the plinth filter panel
Use a damp cloth t
o remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Che
ck whether the cooling fins are
blocked with fluff (as follows).
Checking the heat exchanger unit
Danger of inj
ury! Do not touch
the cooling fins. You could cut
yourself.
Look to see if fluff has accumulated.
If there is visible soiling:
Clean using a vacuum cleaner
with a dusting brush attached.
C
arefully pass the vacuum cleaner
brush over the heat exchanger
cooling fins without applying any
pressure. Otherwise the cooling fins
could be bent out of shape or
become damaged.
C
arefully vacuum up any visible fluff
or dirt.
To Next Page
Loading...
Need help?
General
