Delay start
28
Selecting Delay start
With Delay start you can delay the start
of the pr
ogramme by up to a maximum
of 24 hours.
However: Delay star
t cannot be used
with the
Warm air p
rogramme.
Aft
er selecting the programme, touch
the sensor.
– will flash.
– From t
o Delay start is
selected in half-hour increments, and
from then up to in one-hour
increments.
– If you keep your finger on the sensor,
the time will
count up to .
– Touching the sensor again when
is in the display will delet
e the
time selected.
Starting Delay start
P
ress the
Start/Stop b
utton.
– lights up.
– Delay start times of more than will
count down in hours and then in
min
utes until the start of the
programme.
– The drum will turn briefly every hour
unti
l the start of the programme to
reduce creasing.
Changing Delay start after it
has star
ted counting down
P
ress the Start/Stop button.
– will flash.
T
ouch the sensor to change the
time.
P
ress the
Start/Stop b
utton.
Adding or removing laundry
before a programme starts
Y
ou can open the door to add/
remove laundry.
– All programme settings will be saved.
– will flash.
You can change the drying level, if
required.
P
ress the
Start/Stop b
utton so that
the Delay start time continues to
count down.
Cancelling Delay start
Switch the dr
yer off and then on
again.