Warning and Safety instructions
8
Technical safety
Befor
e setting up the tumble dryer, check it for any externally
visible damage.
Do not install or use a damaged tumble dryer.
Befor
e connecting the tumble dryer, ensure that the connection
data on the data plate (fuse rating, voltage and frequency) matches
the mains electricity supply. If in any doubt, consult a qualified
electrician.
The ele
ctrical safety of this tumble dryer can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt, please have the household
wiring system tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).
Reliable
and safe operation of this tumble dryer can only be
assured if it has been connected to the mains electricity supply.
Do not con
nect the tumble dryer to the mains electricity supply by
an extension lead. Extension leads do not guarantee the required
safety of the appliance (e.g. danger of overheating).
If
the connection cable is faulty, it must only be replaced by a
Miele approved service technician to protect the user from danger.
Unauth
orised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele authorised service technician, otherwise any
subsequent damage will not be covered by the warranty.
F
aulty components must only be replaced by genuine Miele spare
parts. Miele can only guarantee the safety of the appliance when
Miele replacement parts are used.
To Next Page
Loading...
