Miele TKR 650 WP - Changing the Programme Sequence

Changing the programme sequence
45
You cannot change to another
pr
ogramme once a programme has
started (this prevents unintentional
alterations).
If you move the programme selector,
Programme cannot be changed will
light up in the display until you move
the pr
ogramme selector back to the
original programme.
You will need to cancel the current
pr
ogramme before you can select a
new one.
Once a programme has
star
ted ...
... cancelling the programme and
then selecting a n
ew programme
 P
ress the Start/Stop button.
 Confirm Cancel programme
with the
OK sensor
.
– Cooling down will light up in the
display, dep
ending on the drying
duration and the drying temperature
reached.
– Wait until Finish lights up in the
display or pr
ess the
Start/Stop
butt
on again until
Finish lights up.
 P
ress the  button to switch the
dryer off.
 P
ress the  button to switch the
dryer on.
 Selec
t and start a new programme
straight away.
... saving the programme as a
favourite
 P
ress the
Start/Stop b
utton.
 Select and confirm Save programme.
You can save this programme under
Favourites. See "Favourites, 2. Entering
a name".
Adding or removing laundry
aft
er a programme has started
 P
ress the Start/Stop button.
 Select Cancel programme.
 Co
nfirm by touching the
OK sensor
.
– Cooling down will light up in the
display, dep
ending on the drying
duration and the drying temperature
reached.
– Wait until Finish lights up in the
display or pr
ess the
Start/Stop
butt
on again until
Finish lights up.
 Danger of burning.
Do not touch the back of the drum
when adding o
r removing items. The
drum and the items can be very hot.
 Add
or remove items.
 Clo
se the door.
To continue with the programme:
(change the drying level first of all, if
necessa
ry)
 P
ress the
Start/Stop b
utton.
Programme duration
Altering the programme sequence can
cause the
programme duration shown
in the display to be adjusted.