Cleaning and care
51
Cleaning the plinth filter panel
Use a damp cloth t
o remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Che
ck whether the cooling fins are
blocked with fluff (as follows).
Checking the condenser unit
Danger
of injury. Do not touch
the cooling fins. You could cut
yourself.
Look to see if fluff has accumulated.
If there is visible soiling:
Clean using a vacuum cleaner
with a dusting brush attached.
C
arefully pass the vacuum cleaner
brush over the heat exchanger
cooling fins without applying any
pressure. Otherwise the cooling fins
could be bent out of shape or
become damaged.
C
arefully vacuum up any visible fluff
or soiling.
To Next Page
Loading...
Need help?
General
