Installation and connection
71
Additional installation
r
equirements
Pushing the dryer under a worktop
This tumble dryer is suitable for
push
ing under a worktop.
It is ver
y important to avoid a
build-up of heat. The warm air which
is expelled from the dryer must be
able to dissipate. Warm air which
cannot dissipate could cause a fault.
– The appliance lid cannot be
r
emoved.
– The electrical socket must be located
in an accessible position near the
appliance.
– Drying durations may increase
sli
ghtly.
Optional accessories
– Washer-dryer stack
The tumble dryer can be combined with
a
Miele washing machine in a washer-
dryer stack. The appropriate Miele
washer-dryer stacking kit is required.
– Plinth
The tumble dryer can be fitted on a
pli
nth with drawer (please note the
plinth may not be available in all
countries).
To Next Page
Loading...
Need help?
General
