Electronic system lock
The system lock prevents your ma
-
chine being used without your knowl
-
edge.
When the system lock has been acti
-
vated:
–
the drum door cannot be opened
with the
Door
button and
–
a programme cannot be started.
To activate the system lock
First, ensure that:
– The drum door is closed
– The programme selector is at
Finish
.
A Switch on the washing machine with
the I-ON/0-OFF button.
B Press the
Pre-wash
button and keep
it pressed in while carrying out steps
C to E
C Slowly turn the programme selector
clockwise
stage by stage to
COTTONS 60°C.
D Now slowly turn the programme se
-
lector anti-clockwise
stage by stage
to
Finish
.
E Next slowly turn the programme se
-
lector anti-clockwise
stage by stage
to DELICATES cold.
The
locked
check light (lower right
on the control panel) will flash.
F Now release the
Pre-wash
button.
G Turn the programme selector to
Finish
.
H Switch the washing machine off with
the I-ON/0-OFF button.
To de-activate the system lock
Repeat steps A to F. The
locked
check light goes out.
Locking functions
32
To Next Page
Loading...
