Miele W 463 - Top-Up Rinse for Cottons

Top-up rinse for COTTONS
When this is activated, additional wa
-
ter flows into the drum at the end of
the main wash and the suds are
cooled down. Hot suds can damage
plastic drainage pipes.
Top-up rinse takes place when temper
-
atures of 95°C and 75°C are selected.
The washing machine is delivered with
the Top-up rinse for COTTONS deacti
-
vated.
Follow steps
to to programme
and store in memory.
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using the
additional option buttons in combina-
tion with the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
–
The drum door is closed.
–
The programme selector is at
Finish .
A Press the additional option buttons
Rapid and Water plus at the same
time, hold pressed in and .
B . . . switch the machine on with the
I-ON/0-OFF button.
C Let go of all these buttons. P 0 ap
-
pears in the display.
D Turn the programme selector to
Starch :
E The P will now flash in the display al
-
ternating with the number 10
In addition, one of the following will ap
-
pear on the right of the display:
0 = Top-up rinse is deactivated
or
1 = Top-up rinse is activated
F Press the START button to change
from one to the other. The display will
change accordingly from 0 to 1 or
from 1 to 0.
G Switch the washing machine off with
the I-ON/0-OFF button.
The setting you have selected is now
stored in memory and will remain so un
-
til you alter it.
Programmable functions
63