Miele WCA020 WCS Active - How the Sensor Controls Work

Operating the washing machine
13
i
Indicator lights
 lights up if there are faults
affecting the water inlet and
drainage
 lights up if excess detergent
was used
 lights up as a reminder about
hygiene information
 The Add laundryfunction
cannot be selected.
j
Programme selector
for selecting programmes and for
switching off the appliance. The
washing machine is switched on
when you select a programme, and
switched off by turning the
programme selector to the 
position.
How the sensor controls work
The sensor controls control the values
located above them.
The,,,,andsensor
controls react to fingertip contact.
When a programme is selected, values
are pre-set for the and sensor
controls. Touching the sensor control
decreases the value. After the smallest
value is reached, the display returns to
the maximum value.
How the sensor controls work
The sensor controls control the values
located above them.
The,,,,andsensor
controls react to fingertip contact.
When a programme is selected, values
are pre-set for the and sensor
controls. Touching the sensor control
decreases the value. After the smallest
value is reached, the display returns to
the maximum value.