Miele WCA020 WCS Active - Programmable Functions; Opening the Programming Level; Choosing and Selecting a Programmable Function

Programmable functions
71
The programmable functions are used
to alter the washing machine’s
electronics to suit changing
requirements. Programmable
functions can be altered at any time.
Opening the programming
level
Programming is carried out in 8 steps
(, ,...) using the sensor
controls.
Prerequisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
 Touch the sensor control and
hold it down whilst carrying out
steps  and .
 Close the washing machine door.
Wait until Start/Add laundrylights up
constantly...
 ...and then release the sensor
control.
will light up in the time display.
Choosing and selecting a
programmable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the sensor control to select
the other programmable functions
one by one:
Programmable functions
 Keypad tone
 PIN code
 Indicator switch-off behaviour
 Memory
 Additional long pre-wash – Cottons
 Soak duration
 Gentle action
 Reduced temperature
 Water plus
 Water plus level
 Maximum rinse level
 Suds cooling
 Anti-crease
 Low water pressure
 Confirm the selected programmable
function by touching the sensor
control.