Miele WCA020 WCS Active - Installation; Installing Under a Continuous Worktop; Washer-Dryer Stack Installation

Installation
*INSTALLATION*
63
Installing under a continuous
worktop
 Risk of electric shock due to
exposed cables
There is a risk of coming into contact
with live parts while the lid is
removed.
Building under kits* must only be
installed/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.
- A special building under kit* is
required. The cover plate supplied
with the building under kit is used to
replace the machine lid. It is
necessary to fit the coverplate for
electrical safety reasons.
- Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the machine is in its final
position.
Fitting instructions are supplied with the
building-under kit.
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate “WTV”
stacking kit* to match your dryer is
required.
All parts marked* are available from
your Dealer or Miele.
Please note:
a = at least 2cm
b = WTV without drawer: 172cm
WTV with drawer: 181cm
c = 64cm