Miele WCA020 WCS Active - Programmable Functions; Editing and Saving Programmable Functions; P13 Keypad Tone Function

Programmable functions
72
Editing and saving a
programmable function
You can either switch a programmable
function on/off or select different
options.
 Touch the sensor control to
switch the programmable function
on/off or to select an option:
Programmable function
Available options
    
  
  
  
  
    
    
  
  
   
    
  
  
  
  
 = Can be selected
 = Factory default setting
 Touch the sensor control to
confirm your selection.
The number of the programmable
function, e.g., will then light up
again.
Exit programming level
 Turn the programme selector to .
The option you have selected is now
stored in memory. You can change it
again at any time.
 Keypad tone
Each touch of a sensor is confirmed
with an audible tone.
Options
 = Keypad tone switched off
 = Keypad tone switched on
(factory default setting)