Miele WCE 670 - Before using for the first time (continued); Setting up Miele@home

Before using for the first time
18
Switching on the washing
machine
 Turn the programme selector to the
Cottons programme.
The welcome tone will sound and the
welcome screen will light up.
The display will guide you through the
5steps of the initial commissioning
process.
1. Setting the language
You will be asked to select the language
you require for the display. It is possible
to change the language at any time by
turning the programme selector to the
Further programmes/ position and
then selecting the Settings  sub-menu.
english (AU)
OK






 Touch the  sensors until the
language you require appears in the
display.
 Confirm your choice of language by
touching the OK sensor.
2. Setting up Miele@home
Your washing machine is equipped
with an integrated Wi-Fi module. The
washing machine can be connected to
the household Wi-Fi network.
You will then be able to operate the
washing machine via the
Miele@mobile app.
The following message appears in the
display:
 Miele@home
 Confirm with OK.
The following message appears in the
display:
Set up now
 To set up Miele@home now: Touch
the OK sensor.
 To postpone setup until later: Touch
the  sensor until the following
appears in the display: Set up later and
press OK to confirm.
 Select the required connection type
from the display.
1. Connect via WPS
2. Connect via App
Before installing the washing
machine in its final location, ensure
the signal strength is sufficient for
your Wi-Fi network.