EasyManua.ls Logo

Miele WCE 670 - Problem solving guide (continued); Door will not open

Miele WCE 670
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem solving guide
68
The door will not open
Problem Possible cause and remedy
The door cannot be
pulled open during a
programme.
The drum is locked during a programme.
Touch the Start/Stop sensor to cancel the
programme.
The programme is cancelled, the door unlocks and
you can pull it open.
There is still water in the drum and the machine is
unable to drain.
Clean the drain filter and the drain pump as
described in “Opening the door in the event of a
blocked drain outlet and/or power cut”.
Extra cooling
appears in the display
after a programme has
been cancelled.
For safety reasons, the door cannot be opened if the
suds temperature is higher than 55°C.
Wait until the temperature in the drum has
decreased and the message has gone out in the
display.
The following appears
in the display:
 Service Door release
fault F35
The door lock has jammed.
Call Miele.

Table of Contents

Related product manuals