Before using for the first time
17
Running the first programme
Turn on the tap.
Turn the programme selector to
Cottons.
The washing machine is now switched
on and in the control panel, the
temperature 60°C lights up.
Touch the Start/Stop sensor.
The programme will start and the
symbol lights up in the control panel.
After 10 minutes, the indicators dim
and the Start/Stop sensor lights up
constantly.
After the end of the programme
At the end of the programme, the Anti-
crease function is switched on. The
symbol lights up in the control panel;
: appears in the time display and
the drum occasionally rotates.
Touch the Start/Stop sensor.
The door will be unlocked.
Reach under the door grip and pull
the door open.
When the programme has ended,
turn the programme selector to.
The washing machine is switched off
and is now ready for use.
Useful tip: For safety reasons close the
door. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
Energy savings
– 10 minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– 15 minutes after completion of the
anti-crease phase, the washing
machine switches off completely and
the door lock is released.
To Next Page
Loading...
