EasyManua.ls Logo

Miele WDD 030 - Spin Cycle Management; Adjusting Spin Speed

Miele WDD 030
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spinning
28
Final spin speed
Programme Max. possible
rpm
Cottons 1400
Cottons 1400
Minimum iron 1200
Delicates 900
Woollens 1200*
Shirts 900
Express 20 1200
Dark garments/Denim 1200
Outerwear 900
Proofing 1200
Drain/Spin 1400
Separate rinse/Starch 1200
Final spin speed in the
programme
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel. For programmes
marked with a * in the chart, the
optimum spin speed is not the
maximum spin speed.
You can reduce the final spin speed or,
depending on the programme, increase
it.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.

Table of Contents

Related product manuals