Miele WDD 030 - Water Plus Functionality (P30); Water Plus Level Adjustment (P31); Maximum Rinse Level Setting (P32)

Programmable functions
76
 Water plus
You can determine the amount of
water used if the Water plus Extra is
selected.
Options
 = More water is used in the wash
and rinse stages (factory
default setting)
 = An extra rinse is carried out
 = The water level is increased in
the wash and rinse stages and
an additional rinse is carried
out
 Water plus level
There are three different water levels
which can be selected by activating
the Water plus Extra.
Options
 = No higher water level (factory
default setting)
 = Water level increased by 1level
when washing and rinsing
 = Water level increased by
2levels when washing and
rinsing
 = Water level increased by
3levels when washing and
rinsing
 Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Options
 = Maximum rinse level is
switched off (factory default
setting)
 = Maximum rinse level is
switched on