Miele WDD 030 - Using Delay Start; Initiating Delay Start; Modifying Delay Start Time; Cancelling Delay Start

Delay start
30
With Delay start you can delay the start
of a programme from 30 minutes up to
a maximum of 24hours. This allows
you to make use of night-time economy
electricity rates, for example.
Selecting Delay start
Delay start cannot be selected with
Drain/Spin or Proofing.
 Select the programme required.
 Touch the  sensor.
The  sensor lights up brightly.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
– For less than 10 hours, the Delay
start time changes in increments of
30 minutes
– For more than 10 hours, the Delay
start time changes in increments of 1
hour
Starting Delay start
 Touch the flashing Start/Stop sensor.
The Delay start process starts and
counts down in the time display.
Altering Delay start
 Touch the Start/Stop sensor.
The Delay start process stops and the
 symbol in the control panel goes out.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
 Touch the flashing Start/Stop sensor.
To cancel a Delay start that has
already started
 Touch the Start/Stop sensor.
The Delay start process stops and the
 symbol in the control panel goes out.
 Touch the brightly lit sensor.
Delay start is cancelled and the 
sensor goes out. The programme
duration appears in the time display.
 Touch the flashing Start/Stop sensor
in order to start the wash programme.