Miele WTF 130 WPM User Manual

WASHING
32
To omit the final spin (Rinse hold)
 Use the Spin speed button to select
the  (rinse hold) setting.
The laundry is not spun after the final
rinse and remains in the final rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
To start the final spin:
 Use the spin speed button to select
the required spin speed and confirm
your choice withOK.
The laundry will be spun at the speed
you have set.
or
 Start the final spin with the Start/Stop
button.
The laundry will be spun at the max-
imum spin speed for the selected wash
programme.
To end the programme:
 Use the spin speed button to select
the 0 rpm setting (without spin) and
confirm your choice with OK.
The water will drain away.
To omit rinse and interim spin and
the final spin
 Press the Spin speed button.
 Select the 0 rpm setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm