Miele WTF 130 WPM User Manual

WASHING
35
Further programmes
Denim cold to 60°C Max. load 3.0 kg
Note – Wash denim inside-out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
– Close any zips, do up buttons etc. before washing.
Dark garments cold to 60°C Max. load 3.0 kg
Use for Black and dark items made of cotton or mixed fibres.
Note Wash inside out.
Outerwear cold to 40°C Max. load 2.5 kg
Use for
Outerwear made from membrane fabrics such as Gore-Tex
®
, SYM-
PATEX
®
, WINDSTOPPER
®
etc.
Note – Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proof-
ing programme. Proofing should not be done every time the gar-
ment is washed.
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Note – The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
by tumble drying or by ironing.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm