Miele WTF 130 WPM User Manual

WASHING
38
Separate rinse /
Starch
Max. load 7.0 kg
Use for – Hand washed items which only need rinsing
– Table cloths, serviettes and workwear which require starching.
Note – Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric condi-
tioner.
– Items will be rinsed very effectively using two rinse cycles by ac-
tivating the Water plus option. The Extra rinse setting needs to be
activated for the Water plus option. See "Settings".
Timed drying Cool air "Programme chart - DRYING"
Rinse out fluff  See "Rinse out fluff" section.
Maintenance wash 75°C Empty
With frequent washing at low temperatures there is a danger of a build-up of
bacteria in the washer-dryer.
Cleaning the washer-dryer will significantly reduce bacteria, mould and biofilm
and prevent the build-up of unpleasant odours.
Note – Optimum results can be achieved by using Miele machine cleaner.
Alternatively, a universal powder detergent can be used.
– Dispense the machine cleaner or universal detergent directly into
the drum.
– Do not load any laundry. The drum must be empty for the main-
tenance wash.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm