To Next PageTo Next PageWhat does error E21-03 or E21-04 on Migatronic OMEGA2 mean?
Error codes E21-03 and E21-04 indicate that the welding program package does not match your control unit. Use an SD card with software that is compatible with your control unit.
What does E02-04 error mean on Migatronic Welding System?
The error code E02-04 indicates a CAN communication error. To address this, check the intermediary cable and plug.
What to do if Migatronic Welding System displays E11-20 error?
The E11-20 error indicates a current sensor error. First, check the current sensor. If the problem persists, contact MIGATRONIC service.
Why am I getting E11-28 error on my Migatronic OMEGA2 Welding System?
The E11-28 error indicates a phase or voltage error. Here’s what to check: 1. Check all three phases. 2. Check for under-voltage. If the problem continues, contact MIGATRONIC service.
General| Brand | Migatronic |
|---|---|
| Model | OMEGA2 |
| Category | Welding System |
| Language | English |
Steps for unpacking the welding machine after delivery.
Connecting the machine to mains, earth, and welding hose.
Guidance on safely lifting the welding machine using different methods.
How to adjust the wire brake for proper wire feeding.
Connecting shielding gas and torch adjustment for Dialog torch.
Using inching for wire feed and setting up gouging operations.
Steps for connecting the water cooling unit to the welding machine.
Guidance on changing the welding polarity for specific wire types.
Steps for initiating a weld after setup.
Procedure for reading software from the SD card.
Steps for calibrating the gas flow on the welding machine.
How to activate and use the lock function for security.
How to view the installed software versions on the machine.
Procedure to calibrate cable resistance for optimal welding.
List of error codes and their causes/solutions.
Explanation of fault symbols and their meanings.
