Warning!
Product Usage
The Mighty Mule Gate Opener meets all of the safety requirements of a Class I Residential Vehicular Gate Operator
and is intended for use solely with vehicular swing gates in single-family residential applications.
The Mighty Mule Gate Opener system certified to be in compliance with the following safety standards (current
edition as of publication date):
This equipment is similar to other gate or door
equipment and meets or exceeds Underwriters
Laboratory Standard 325 (UL 325). However, gate
equipment has hazards associated with its use and
therefore by installing this product the installer
and user accept full responsibility for following
and noting the installation and safety instructions.
Failure to follow installation and safety instructions
can result in hazards developing due to improper
assembly. You agree to properly install this product
and that if you fail to do so GTO shall in no event
be liable for direct, indirect, incidental, special or
consequential damages or loss of prots whether
based in contract tort or any other legal theory
during the course of the warranty or at any time
thereafter. The installer and/or user agree to
assume responsibility for all liability and use of this
product releasing GTO from any and all liability.
If you are not in agreement with this disclaimer
or do not feel capable of properly following all
installation and safety instructions you may return
this product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND
COMPLETELY before attempting to install and
use this automatic gate opener. This gate opener
produces a high level of force. Stay clear of the
unit while it is operating and exercise caution at all
times.
All automatic gate openers are intended for use on
vehicular gates only.
Residential Vehicular Gate Opener-Class I:
A vehicular gate opener (or system) intended for
use in a home of one-to-four single family dwelling,
or a garage or parking area associated therewith.
Commercial/General Access Vehicular Gate
Opener-Class II: A vehicular gate opener (or
system) intended for use in a commercial location
or building such as a multifamily housing unit (ve
or more single family units), hotel, garages, retail
store, or other building servicing the general public.
Industrial/Limited Access Vehicular Gate
Opener–Class III: A vehicular gate opener (or
system) intended for use in an industrial location or
building such as a factory or loading dock area or
other locations not intended to service the general
public.
Restricted Access Vehicular Gate Opener–
Class IV: A vehicular gate opener (or system)
intended for use in a guarded industrial location or
building such as an airport security area or other
restricted access locations not servicing the general
public, in which unauthorized access is prevented
via supervision by security personnel.
Product in compliance with the latest UL-325 and UL-991 safety standards by ETL. Product in compliance
with CAN/CSA-C22.2 No. 247-92.
Product in compliance with IEC 60335-2-103:2003 and IEC 60335-1:2004, including A1:2004.
Vehicular Gate Opener Class Categories
To Next Page
Loading...
