EasyManua.ls Logo

Mighty Mule FM502 - User Manual

Mighty Mule FM502
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Printed in China for GTO Access Systems, LLC.
WARNING!
This equipment is similar to other gate or door equipment and meets or exceeds
Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has
hazards associated with its use and therefore by installing this product the installer
and user accept full responsibility for following and noting the installation and safety
instructions. Failure to follow installation and safety instructions can result in hazards
developing due to improper assembly. You agree to properly install this product and
that if you fail to do so GTO Access Systems, LLC, shall in no event be liable for direct,
indirect, incidental, special or consequential damages or loss of profits whether based
in contract tort or any other legal theory during the course of the warranty or at any
time thereafter. The installer and/or user agree to assume responsibility for all liability
and use of this product releasing GTO Access Systems, LLC, from any and all liability.
If you are not in agreement with this disclaimer or do not feel capable of properly
following all installation and safety instructions you may return this product for full
replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to
install and use this automatic gate opener. This gate opener produces a high level of
force. Stay clear of the unit while it is operating and exercise caution at all times.
All automatic gate openers are intended for use on vehicular gates only.
Installation Manual
FM502
This product meets and exceeds the requirements of UL 325, the standard which
regulates gate operator safety, by Underwriters Laboratories Inc.
GTO Sales: 800-543-4283 • Fax 850-575-8912
GTO Technical Service 800-453-1236
For 24 hour/day, 7 day/week Technical Service visit http://support.gtoinc.com
For more information on Mighty Mule’s full line of Automatic Gate Openers and Access Controls visit www.mightymule.com
For more information on Mighty Mule’s full line of Automatic Gate Openers and Access Controls visit our website at www.mightymule.com
Copyright
©
2015 GTO Access Systems, LLC rev 12.14.15
Question and Answer IconNeed help?

Do you have a question about the Mighty Mule FM502 and is the answer not in the manual?

Summary

U.L. Gate Operator Classifications

Product Usage

Details the intended application and compliance standards for the GTO Gate Operator.

Critical Pre-Installation Information

Important Safety Instructions - General

Disconnecting the Opener for Manual Operation

Procedure to manually open and close the gate by disconnecting the opener.

Important Safety Instructions - Consumer Focus

Before Installation Checklist

Essential checks and verifications to perform prior to gate opener installation.

Important Safety Instructions - During Installation

Important Safety Instructions - Post-Installation

Important Safety Instructions - Entrapment Protection

Important Safety Instructions - Gate Specifics

Entrapment Zone Awareness

Understanding of hazardous areas around moving gates.

Opener and Mounting Hardware Parts List

Control Box and Electrical Components List

Gate Opener Technical Specifications

Pull-to-Open Gate Installation Overview

Gate Preparation and Alignment

Steps for ensuring the gate is properly prepared and aligned for opener installation.

Mounting Hardware Installation Steps

Bracket Mounting Position Determination

Installing Post and Gate Brackets

Mounting the Master Opener Arm

Mounting the Second Opener Arm

Installation of Closed Position Stops

Control Box Mounting Procedure

Connecting Opener Power Cables

Powering the System: Transformer Setup

Control Board Settings and DIP Switches

DIP Switch Functionality Explained

Details on the operational modes controlled by each DIP switch.

Setting the Auto Close Timer

Adjusting the time delay before the gate automatically closes.

Setting Closed Position Limits for Gates

Programming Personal Transmitter Codes

Adjusting Obstruction Sensitivity

Receiver Unit Installation Guidelines

Connecting Accessory Inputs

Wiring Accessories Diagram and Options

Push-to-Open Gate Installation Guide

Setting Open Position Limits for Gates

Troubleshooting Gate Opener Issues

Interpreting Control Board Visual Feedback

Battery and Power System Troubleshooting

Gate Opener Repair and Return Service

Column Mounting Information for Gates

Powering and Entry Accessories

Security and Pedestrian Access Accessories

Additional Hardware and Control Accessories

Mighty Mule FM502 Specifications

General IconGeneral
BrandMighty Mule
ModelFM502
CategoryGate Opener
LanguageEnglish

Related product manuals