Migomag SIM 200 LCD - Description; Unpacking

Operators Manual
7
Please read through this owner’s manual carefully before using product. Protect yourself
and others by observing all safety informaon, warnings, and cauons. Failure to comply
with instrucons could result in personal injury and/or damage to product or property.
Please retain these instrucons for future reference.
Descripon
The SIM 200 LCD series is a DC inverter 3 in 1 MIG welder. This unit uses 1~Phase 240V,
50/60HZ AC power. A 25 amp me delay fuse or circuit breaker is recommended. The SIM
200 LCD series is ideal for light industrial. MIG/MAG welding carbon steel, stainless steel,
aluminium, silicon bronze.
Unpacking
1. Remove cartons, bags or styrofoam containing the welder machine and accessories.
2. Check the contents with the packing list below.
ITEM QTY.
SIM 200 LCD Inverter MIG Welder 1 unit
MIG gun MMPRO 24 3MT 1pcs
TIG Torch MM17FXV 1pcs
Earth cable with clamp 1pcs
Gas hose ф6 5m
MIG Tip ф0.8 1pcs
Gas Regulator 1pcs
Operator’s Manual 1set
Drive Roller 0.6, 0.8 V, 0.9, 1.0V, 0.9-1.0U
3. Aer unpacking unit, inspect carefully for any damage that may have occurred during
transit. Check for loose, missing, or damaged parts.