Migomag SIM 200 LCD - Page 7

Migomag SIM 200 LCD
Model No ASIM200LCD
4
• Cover all bare skin areas exposed to the arc with protecve clothing and shoes. Flame-
retardant cloth or leather shirts, coats, pants or coveralls are available for protecon
• Use screens or other barriers to protect other people from the arc rays emied from
your welding
• Warn people in your welding area when you are going to strike an arc so they can
protect themselves
Fire Hazards
WARNING! Do not weld on containers or pipes that contain or have had ammable,
gaseous or liquid combusbles in them. Welding creates sparks and heat that can ignite
ammable and explosive materials.
• Do not operate any electric arc welder in areas where ammable or explosive
materials are present
• Remove all ammable materials within 35 feet of the welding arc. If removal is not
possible, ghtly cover them with reproof covers
• Take precauons to ensure that ying sparks do not cause res or explosions in hidden
areas, cracks or areas you cannot see
• Keep a re exnguisher close in the case of re
• Wear garments that are oil-free with no pockets or cus that will collect sparks
• Do not have on you any items that are combusble, such as lighters or matches
• Keep work lead connected as close to the weld area as possible to prevent any
unknown, unintended paths of electrical current from causing electrical shock and re
hazards
• To prevent any unintended arcs, cut wire back to ¼” sck out aer welding
Hot Materials
CAUTION! Welded materials are hot and can cause severe burns if handled improperly.
• Do not touch welded materials with bare hands
• Do not touch TIG gun nozzle aer welding unl it has had me to cool down