EasyManua.ls Logo

Migomag SIM 200 LCD - Page 8

Migomag SIM 200 LCD
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operators Manual
5
Sparks/Flying Debris
CAUTION! Welding creates hot sparks that can cause injury. Chipping slag o welds
creates ying debris.
• Wear protecve apparel at all mes: ANSI-approved safety glasses or shield, welder’s
hat and ear plugs to keep sparks out of ears and hair
Electromagnec Field - CAUTION!
• Electromagnec elds can interfere with various electrical and electronic devices such
as pacemakers
• Consult your doctor before using any electric arc welder or cung device
• Keep people with pacemakers away from your welding area when welding
• Do not wrap cable around your body while welding
• Wrap TIG gun and ground cable together whenever possible
• Keep TIG gun and ground cables on the same side of your body
Shielding Gas Cylinders can Explode
WARNING! High pressure cylinders can explode if damaged, so treat them carefully.
• Never expose cylinders to high heat, sparks, open ames, mechanical shocks or arcs
• Do not touch cylinder with TIG gun
• Do not weld on the cylinder
• Always secure cylinder upright to a cart or staonary object
• Keep cylinders away from welding or electrical circuits
• Use the proper regulators, gas hose and ngs for the specic applicaon
• Do not look into the valve when opening it