Mikado VBar Control User Manual

17
Transmitter Setup
Bind a VBar Control Receiver to the VBar Control transmitter. Click for a list of available
devices (10 digit serial number of connected VBar Flybarless controller or model name for
already set-up models), select the one you want to bind. See ((Querverweis))
Application enable helps to enable or disable the Apps you want to use. Check or un-
check the boxes. Disabled Apps will not show in the setup process. All setup information
required for ight operation is stored in each individual VBar, so you will not lose function-
ality or settings if you disable or even uninstall the App to free menus or memory.
USB Mode allows to choose between USB Stick mode (for normal operation or setup/up-
date purposes), Simulator (renders the VBar Control a USB game controller to go with your
favorite simulator), or No USB (disables the USB connector temporarily).

Mikado VBar Control Specifications

General

Brand	Mikado
Model	VBar Control
Category	Remote Control
Language	English