9
What is VBar Control?
VBar Control is an advanced multi-function FHSS radio control system for model helicop-
ters and, in the future, also for airplanes and other radio controlled model operations. With
it’s unique concept of programming and operation, it’s the ideal companion to go with your
radio controlled and VBar equipped models.
Purpose, modications and export regulations
VBar Control is designated for use with model helicopters, in the future for use with model
airplanes. VBar control is not designated for any other purpose than remote control of mod-
els for recreation or hobby.
Outside of the country of manufacture, VBar Control has to be approved by the laws appli-
cable in the country of import, especially regarding emission of radio frequencies. On every
re-export, VBar Control may be subject to regulations. Prior to use, approval of the respon-
sible authorities may be required. If in doubt, contact your dealer to assert that all regula-
tions applicable have been met. VBar control must not be used to control other than un-
manned radio control models on line of sight.
Mikado Model Helicopters takes no responsibility for any modication or replacement of
parts on VBar Control. Any modication other than described in the product documentation
may void warranty.
Icons used in this manual
☝ Attention Problems and physical damage or physical injury may occur if not followed carefully.
⚠ Warning Dangerous conditions may occur, causing serious physical injury or even death, or high
physical damage, if not followed carefully.
☠ Danger Dangerous conditions may occur, causing death, serious physical injury or high physical
damage if not followed carefully.
☒ Procedures and actions that are prohibited.
☑ Procedures or actions that are mandatory.
To Next Page
Loading...
Need help?
General
