27
■ Separate the antenna tips as far as possible, distance is even more important than
achieving a 90° angle.
■ Do not unnecessarily cover the actual antennae.
■ Do not bend or kink the actual antennae.
■ The coaxial wires may be bent, but in a gentle arc, not 90° sharp, as not to damage the
actual antenna wire inside.
■ Separate the antennae as far as possible from electric motors, electronic speed control-
lers or other sources of electric/electronic noise.
■ Separate the antennae as far as possible from conductive or shielding materials/surfac-
es. When installed inside a fuselage, try and place the antenna tips outside the fuselage.
■ Use of extension leads for positioning the VBar Control Receiver in scale fuselages is
possible.
To Next Page
Loading...
