2DH Boussinesq Wave Module - Examples
53
Figures 4.28, 4.29 and 4.30 illustrate further spectral and digital analysis of
the MIKE 21 BW model results, which requires a valid license for the WS
Wave Analysis Tool included in MIKE Zero.
Figure 4.28 Calculated directional spectrum at the Point 1 and Point 2 (see
Figure 4.27 for location). The spectrum is calculated using the MIKE
Zero WSWAT Directional Wave Analysis Module
Figure 4.29 Calculated mean wave direction on top of the bathymetry. The spec-
trum is calculated using the MIKE Zero WSWAT Directional Wave Anal-
ysis Module
To Next Page
Loading...